INSTALLATION OPTIONS FOR
FORMED PLASTIC LETTERS
| INSTALLATION METHODS AVAILABLE | ||
|---|---|---|
FLANGE  |
PLAIN  |
PAD  |
| FLANGE is a flat 3/16 to 1/4" perimeter on the letter return into which hold can be drilled. Secure with screws or nails. Wider flange available upon request. Not for letters under 6 inches. | PLAIN letters have no installation hardware. | PADS are plastic disks on the rear of the letters. Secure the letters to the wall with silicone adhesive (see accessories). Adjustable or flush pads available upon request. |
STUD  |
COMBINATION  |
COMBINATION ALL  |
| STUDS are metal threaded posts on the rear of the letters. Specify stud lengths of 1, 2, 3, 4, 5, or 6 inches. Specify if studs need to be in line for brick or block wall mortar joints. | COMBINATIONS have pads at the bottom and pad/stud combinations at the top of the letter. Specify if studs need to be in line for brick or block wall mortar joints. Not for letters under 6 inches. | COMBINATION ALL have stud though pads on all mounts. Specify if studs need to be in line for brick or block wall mortar joints. Not for letters under 6 inches. |
OUTSIDE BRACKET  |
INSIDE BRACKET |
WIRE  |
| BRACKETS are L-shaped plastic projections flared outward from the back of the letter. For brackets flared inward or for letters over 18 inches , brackets will be shipped un attached. | WIRES are stainless steel hooks inserted into plastic blocks glued to the inside of the letter. Available for flush mounting or with 1/2, 1, 1-1/2, or 2 inch standoffs. | |
FOAM FILLED  |
FREE STANDING  |
|
| FOAM FILLED letters are filled with rigid urethane foam and cut flush to the back edge of the letter. Available for letters 9 inched and smaller. | FREE STANDING letters have a 90° mounting brackets for installing on roofs. Other angles available upon request. Price is 3 times plain letter. | |